Skip to content

"SLC6X: system environment/base: initscripts

Jump to letter: [ 3ABCDEFGHIJKLMNOPQRSTUVWXYZ ]

initscripts - The inittab file and the /etc/init.d scripts

Website: https://github.com/fedora-sysv/initscripts
License: GPLv2 and GPLv2+
Vendor: Scientific Linux CERN, http://cern.ch/linux
Description:
The initscripts package contains the basic system scripts used to boot
your Red Hat or Fedora system, change runlevels, and shut the system down
cleanly.  Initscripts also contains the scripts that activate and
deactivate most network interfaces.

Packages

initscripts-9.03.61-1.el6.x86_64 [948 KiB] Changelog by David Kaspar [Dee'Kej] (2018-04-27): 
- Move Source & URL to Github
initscripts-9.03.58-1.el6_9.2.x86_64 [948 KiB] Changelog by David Kaspar [Dee'Kej] (2017-09-13): 
- ARPUPDATE option introduced to resolve BZ #1440888
initscripts-9.03.58-1.el6_9.1.x86_64 [948 KiB] Changelog by David Kaspar [Dee'Kej] (2017-04-25): 
- regression in commit a2ecd685d60 fixed [start $vpninterfaces]
initscripts-9.03.58-1.el6.x86_64 [947 KiB] Changelog by David Kaspar [Dee'Kej] (2017-01-18): 
- regression in commit bab72274889 fixed [missing $() for DAD detection]
initscripts-9.03.53-1.el6_8.2.x86_64 [946 KiB] Changelog by David Kaspar [Dee'Kej] (2017-02-09): 
- fix ifdown with 'lo' (loopback) alias (bug #1420053)
initscripts-9.03.53-1.el6_8.1.x86_64 [946 KiB] Changelog by Lukáš Nykrýn (2016-06-13): 
- spec: we need newer lvm
initscripts-9.03.53-1.el6.x86_64 [945 KiB] Changelog by Lukáš Nykrýn (2016-04-12): 
- functions: parse -d first
initscripts-9.03.49-1.el6_7.5.x86_64 [944 KiB] Changelog by Lukáš Nykrýn (2016-03-08): 
- init.d/halt: give init some time to reexecute
initscripts-9.03.49-1.el6_7.4.x86_64 [943 KiB] Changelog by Lukáš Nykrýn (2016-01-22): 
- ifdown-eth: fix comparison
initscripts-9.03.49-1.el6_7.3.x86_64 [943 KiB] Changelog by Lukáš Nykrýn (2015-11-10): 
- ifdown: clean ipv4 localhost addresses
initscripts-9.03.49-1.el6_7.2.x86_64 [943 KiB] Changelog by Lukáš Nykrýn (2015-10-16): 
- ifup-wireless: fix calling of phy_wireless_device
initscripts-9.03.49-1.el6_7.1.x86_64 [943 KiB] Changelog by Lukáš Nykrýn (2015-08-13): 
- rc.sysinit: apply quotas after system is relabeled
initscripts-9.03.49-1.el6.x86_64 [943 KiB] Changelog by Lukáš Nykrýn (2015-04-09): 
- network-functions: fix change_resolv_conf after grep update
initscripts-9.03.46-1.el6_6.1.x86_64 [941 KiB] Changelog by Lukáš Nykrýn (2014-10-24): 
- ifup: also set multicast_snooping after the bridge is up
initscripts-9.03.46-1.el6.x86_64 [941 KiB] Changelog by Lukáš Nykrýn (2014-07-22): 
- ifup,vlan: fix typo
initscripts-9.03.40-2.el6_5.4.x86_64 [939 KiB] Changelog by Lukáš Nykrýn (2014-08-26): 
- bonding: match whole name of interface
initscripts-9.03.40-2.el6_5.3.x86_64 [939 KiB] Changelog by Lukáš Nykrýn (2014-07-07): 
- network-functions: ETHTOOL_DELAY introduction patch
initscripts-9.03.40-2.el6_5.2.x86_64 [939 KiB] Changelog by Lukáš Nykrýn - 9.03.40-2.2 (2014-06-24): 
- hotplug: don't call ifup when new vlan appears
initscripts-9.03.40-2.el6_5.1.x86_64 [939 KiB] Changelog by Lukáš Nykrýn (2014-01-20): 
- init.d/functions: add -b optin to status and killproc
initscripts-9.03.40-2.el6.x86_64 [938 KiB] Changelog by Lukas Nykryn (2013-10-10): 
- fix duplicit then (#1015065)
initscripts-9.03.38-1.el6_4.5.x86_64 [936 KiB] Changelog by Lukáš Nykrýn (2014-07-07): 
- network-functions: ETHTOOL_DELAY introduction patch
initscripts-9.03.38-1.el6_4.4.x86_64 [936 KiB] Changelog by Lukáš Nykrýn - 9.03.38-1.4 (2014-06-24): 
- hotplug: don't call ifup when new vlan appears
initscripts-9.03.38-1.el6_4.2.x86_64 [936 KiB] Changelog by Lukáš Nykrýn (2013-07-24): 
- bonding: set master up before slaves (#987998)
initscripts-9.03.38-1.el6_4.1.x86_64 [936 KiB] Changelog by Lukáš Nykrýn (2013-03-07): 
- fix greps to correctly handle comments and quotation (#919086)
initscripts-9.03.38-1.el6.x86_64 [936 KiB] Changelog by Lukáš Nykrýn (2013-01-09): 
- call ip link up on master after slaves are up (#893395)
initscripts-9.03.31-2.el6_3.1.x86_64 [933 KiB] Changelog by Václav Pavlín (2012-09-06): 
- be less strict about VLAN name (#854852)
initscripts-9.03.31-2.el6.x86_64 [933 KiB] Changelog by Bill Nottingham (2012-05-23): 
- fix the NIS domain setting (#704919)
initscripts-9.03.27-1.el6_2.1.x86_64 [933 KiB] Changelog by Lukas Nykryn (2012-02-22): 
- support ipv6 routing rules (#789056)
initscripts-9.03.27-1.el6.x86_64 [932 KiB] Changelog by Petr Lautrbach (2011-10-07): 
- use restorecon -F for /dev and /dev/pts (#743222)
initscripts-9.03.23-1.el6.x86_64 [930 KiB] Changelog by Petr Lautrbach (2011-04-19): 
- netfs: don't print errors if mdadm isn't installed. (#696110)
initscripts-9.03.17-1.el6_0.1.x86_64 [928 KiB] Changelog by Petr Lautrbach (2010-12-06): 
- Allow 0 as a vlan tag. (#635360)

Listing created by repoview