Skip to content

"SLC5X: Letter N: nash

nash - nash shell

License: GPL
Vendor: Scientific Linux CERN, http://cern.ch/linux
Description:
nash shell used by initrd

Packages

nash-5.1.19.6-82.el5.x86_64 [1.1 MiB] Changelog by Brian C. Lane (2014-04-14):
- Use ! instead of / when searching sysfs for ccis device
  Resolves: rhbz#988020
- Always include ahci module (except on s390) (bcl)
  Resolves: rhbz#978245
- Prompt to recreate default initrd (karsten)
  Resolves: rhbz#472764
nash-5.1.19.6-81.el5_10.x86_64 [1.1 MiB] Changelog by Brian C. Lane (2013-09-17):
- Add libsqlite3 to initrd when fips is used (wmealing)
  Resolves: rhbz#1006058
nash-5.1.19.6-81.el5_9.x86_64 [1.1 MiB] Changelog by Brian C. Lane (2013-09-17):
- Add libsqlite3 to initrd when fips is used (wmealing)
  Resolves: rhbz#1006058
nash-5.1.19.6-80.el5_9.x86_64 [1.1 MiB] Changelog by Brian C. Lane (2013-05-15):
- Rebuild with e2fsprogs-1.39-36.el5
  Resolves: rhbz#963559
nash-5.1.19.6-79.el5.x86_64 [1.1 MiB] Changelog by Brian C. Lane (2012-09-19):
- load Hyper-V modules first (bcl)
  Resolves: rhbz#852686
nash-5.1.19.6-75.el5.x86_64 [1.1 MiB] Changelog by Brian C. Lane (2011-10-25):
- Replace patch for (#593096) with one that works (bcl)
  Resolves: rhbz#593096
nash-5.1.19.6-71.el5_7.1.x86_64 [1.1 MiB] Changelog by Brian C. Lane (2011-11-14):
- Add mpath to the paths searched for DM devices (jruemker)
  Resolves: rhbz#753693
nash-5.1.19.6-71.el5.x86_64 [1.1 MiB] Changelog by Brian C. Lane (2011-05-05):
- Use vecho in modprobe.d patch
  Resolves: rhbz#564392
nash-5.1.19.6-68.el5_6.1.x86_64 [1.1 MiB] Changelog by Brian C. Lane (2011-04-06):
- Add module options from /etc/modprobe.d/*.conf (564392)
  Resolves: rhbz#694052
nash-5.1.19.6-68.el5.x86_64 [1.1 MiB] Changelog by Martin Sivak (2010-12-23):
- No iSCSI on s390
  Related: rhbz#664389
nash-5.1.19.6-61.el5_5.2.x86_64 [1.1 MiB] Changelog by Brian C. Lane (2010-07-19):
- Use location of bindings file from multipath.conf
  Resolves: rhbz#596134
nash-5.1.19.6-61.el5_5.1.x86_64 [1.1 MiB] Changelog by Peter Jones (2010-04-15):
- Update patch for 540641 to correctly use nash's builtin readlink
  Resolves: rhbz#578236
nash-5.1.19.6-61.x86_64 [1.1 MiB] Changelog by Peter Jones (2010-03-08):
- Use "sg" not "scsi_wait_scan" on RHEL-5
  Resolves: rhbz#460899 (#c56)
nash-5.1.19.6-54.x86_64 [1.1 MiB] Changelog by Hans de Goede (2009-06-17):
- Handle cciss controllers correctly in fips mode
  Resolves: rhbz#505108
- IA64 has /boot/efi instead of /boot, handle this correctly in fips mode
  Resolves: rhbz#505111
- Don't require prelink in fips mode
  Resolves: rhbz#505113
nash-5.1.19.6-44.1.x86_64 [1.1 MiB] Changelog by Peter Jones (2009-04-17):
- Supress failures if dm-raid45 modules are not present.
  Resolves: rhbz#496591
nash-5.1.19.6-44.x86_64 [1.1 MiB] Changelog by Peter Jones (2008-12-17):
- Include dm-raid45 and related modules if dmraid is in use.
  Resolves: rhbz#476866

Listing created by repoview