Skip to content

CentOS 7 - Updates for x86_64: unspecified: systemd-python

systemd-python - Python 2 bindings for systemd

Website: http://www.freedesktop.org/wiki/Software/systemd
License: LGPLv2+
Vendor: CentOS
Description:
This package contains bindings which allow Python 2 programs to use
systemd APIs

Packages

systemd-python-219-73.el7_8.8.x86_64 [143 KiB] Changelog by systemd maintenance team (2020-05-25):
- core: make sure to restore the control command id, too (#1837973)
systemd-python-219-73.el7_8.6.x86_64 [142 KiB] Changelog by systemd maintenance team (2020-04-06):
- sd-bus: when attached to an sd-event loop, disconnect on processing errors (#1817504)
- sd-journal: close journal files that were deleted by journald before we've setup inotify watch (#1820073)
- sd-journal: remove the dead code and actually fix #14695 (#1820073)
- swap: adjust swap.c in a similar way to what we just did to mount.c (#1821261)
- swap: finish the secondary swap units' jobs if deactivation of the primary swap unit fails (#1821261)
systemd-python-219-73.el7_8.5.x86_64 [142 KiB] Changelog by systemd maintenance team (2020-03-17):
- core: enforce a ratelimiter when stopping units due to StopWhenUnneeded=1 (#1810576)
- core: rework StopWhenUnneeded= logic (#1810576)
- fix the fix for #1691511 (#1809159)
systemd-python-219-73.el7.1.x86_64 [141 KiB] Changelog by Lukas Nykryn (2019-11-29):
- unit: fix potential use of cgroup_path after free() when freeing unit (#1760149)
systemd-python-219-67.el7_7.4.x86_64 [137 KiB] Changelog by systemd maintenance team (2020-02-18):
- core: when restarting services, don't close fds (#1798162)
- unit: rework a bit how we keep the service fdstore from being destroyed during service restart (#1798162)
- tests: add basic journal test (#1798162)
- tests: add regression test for `systemctl restart systemd-journald` (#1798162)
- tests: add test that journald keeps fds over termination by signal (#1798162)
systemd-python-219-67.el7_7.3.x86_64 [137 KiB] Changelog by Lukas Nykryn (2019-11-29):
- unit: fix potential use of cgroup_path after free() when freeing unit (#1778083)
systemd-python-219-67.el7_7.2.x86_64 [137 KiB] Changelog by David Tardon (2019-09-19):
- core: exclude .slice units from "systemctl isolate" (#1751130)
systemd-python-219-67.el7_7.1.x86_64 [137 KiB] Changelog by Lukas Nykryn (2019-07-12):
- return error value on failure (#1729226)
- revert local changes made during backport of the test (#1729226)
- core/timer: Prevent timer looping when unit cannot start (#1729230)
- core: add a "Requires=" dependency between units and the slices they are located in (#1729228)
- core: rerun GC logic for a unit that loses a reference (#1729228)
- pid1: rename unit_check_gc to unit_may_gc (#1729228)
- pid1: include the source unit in UnitRef (#1729228)
- pid1: fix collection of cycles of units which reference one another (#1729228)
- pid1: free basic unit information at the very end, before freeing the unit (#1729228)
- pid1: properly remove references to the unit from gc queue during final cleanup (#1729228)
- service: relax PID file symlink chain checks a bit (#8133) (#1729414)
- path-util: fix more path_is_mount e792e890f fallout (#1279231)
systemd-python-219-67.el7.x86_64 [136 KiB] Changelog by Michal Sekletár (2019-06-19):
- fix mis-merge (#1714503)
- fs-util: chase_symlinks(): prevent double fre (#1714782)
systemd-python-219-62.el7_6.9.x86_64 [133 KiB] Changelog by Pablo Greco (2019-07-30):
- Update kernel-install script for fedora-like kernels
systemd-python-219-62.el7_6.7.x86_64 [132 KiB] Changelog by Lukas Nykryn (2019-04-24):
- rules: fix memory hotplug rule so systemd-detect-virt does not run too often (#1701230)
systemd-python-219-62.el7_6.6.x86_64 [132 KiB] Changelog by Lukas Nykryn (2019-03-21):
- Revert "bus: when dumping string property values escape the chars we use as end-of-line and end-of-item marks" (#1643172)
systemd-python-219-62.el7_6.5.x86_64 [132 KiB] Changelog by Lukas Nykryn (2019-02-14):
- sd-bus: if we receive an invalid dbus message, ignore and proceeed (#1667871)
systemd-python-219-62.el7_6.3.x86_64 [132 KiB] Changelog by Lukas Nykryn (2019-01-16):
- journald: free cmdline buffers owned by iovec (#1666646)
systemd-python-219-62.el7_6.2.x86_64 [131 KiB] Changelog by Lukas Nykryn (2019-01-07):
- journald: do not store the iovec entry for process commandline on stack (#1657788)
- journald: set a limit on the number of fields (1k) (#1657792)
- journal-remote: set a limit on the number of fields in a message (#1657792)
systemd-python-219-62.el7.x86_64 [131 KiB] Changelog by Lukas Nykryn (2018-09-07):
- cryptsetup-generator: introduce basic keydev support (#1619743)
- cryptsetup-generator: don't return error if target directory already exists (#1619743)
- cryptsetup-generator: allow whitespace characters in keydev specification (#1619743)
- Make sure the mount units pulled by 'RequiresMountsFor=' are loaded (if they exist) (#1619743)
systemd-python-219-57.el7_5.3.x86_64 [128 KiB] Changelog by Lukas Nykryn (2018-08-31):
- restart automounts unit on update (#1596241)
systemd-python-219-57.el7_5.1.x86_64 [128 KiB] Changelog by Lukas Nykryn (2018-06-25):
- umount: always use MNT_FORCE in umount_all() (#7213) (#1571098)
- core: Implement timeout based umount/remount limit (#1571098)
- core: Implement sync_with_progress() (#1571098)
systemd-python-219-57.el7.x86_64 [127 KiB] Changelog by Lukas Nykryn (2018-02-20):
- sd-journal: properly handle inotify queue overflow (#1540538)
- sd-journal: make sure it's safe to call sd_journal_process() before the first sd_journal_wait() (#1540538)
- journalctl: Periodically call sd_journal_process in journalctl (#1540538)
- sd-journal: when picking up a new file, compare inode/device info with previous open file by same name (#1540538)
systemd-python-219-42.el7_4.10.x86_64 [118 KiB] Changelog by Lukas Nykryn (2018-02-21):
- journal: remove error check that never happens (#1465759)
- sd-journal: various clean-ups and modernizations (#1465759)
- journalctl: continue operation, even if we run into an invalid file (#1465759)
- journalctl: when we fail to open a journal file, print why (#1465759)
- sd-journal: properly handle inotify queue overflow (#1540538)
- sd-journal: make sure it's safe to call sd_journal_process() before the first sd_journal_wait() (#1540538)
- sd-journal: when picking up a new file, compare inode/device info with previous open file by same name (#1540538)
- journalctl: Periodically call sd_journal_process in journalctl (#1540538)
systemd-python-219-42.el7_4.7.x86_64 [116 KiB] Changelog by Lukas Nykryn (2018-01-17):
- automount: ack automount requests even when already mounted (#1535135)
systemd-python-219-42.el7_4.6.x86_64 [116 KiB] Changelog by Lukas Nykryn (2018-01-09):
- manager: fix connecting to bus when dbus is actually around (#7205) (#1465737)
systemd-python-219-42.el7_4.4.x86_64 [116 KiB] Changelog by Lukas Nykryn (2017-09-29):
- manager: when reexecuting try to connect to bus only when dbus.service is around (#6773) (#1465737)
systemd-python-219-42.el7_4.1.x86_64 [116 KiB] Changelog by Lukas Nykryn (2017-08-15):
- Revert "udev: net_id: add support for phys_port_name attribute (#4506)" (#1477285)
- reintroduce naming based on phys_port_name for mlxsw and rocker via udev rule
systemd-python-219-42.el7.x86_64 [115 KiB] Changelog by Lukas Nykryn (2017-06-27):
- Revert "rules: move cpu hotplug rule to separate file" (#1465108)
systemd-python-219-30.el7_3.9.x86_64 [109 KiB] Changelog by Lukas Nykryn (2017-04-21):
- core: reinstate propagation of stop/restart jobs via RequsiteOf dependencies (#1436021)
- core: when propagating restart requests due to deps, downgrade restart to try-restart (#1436021)
- core: properly handle jobs that are suppressed to JOB_NOPs when propagating restarts (#1436021)
systemd-python-219-30.el7_3.8.x86_64 [109 KiB] Changelog by Lukas Nykryn (2017-02-13):
- tmp.mount.hm4: After swap.target (#3087) (#1298355)
- make sure all swap units are ordered before the swap target (#1298355)
systemd-python-219-30.el7_3.7.x86_64 [109 KiB] Changelog by Lukas Nykryn (2016-11-29):
- load-fragment: fix parsing values in bytes and prevent returning -ERANGE incorrectly (#1396277)
- core: fix assertion check (#1396312)
systemd-python-219-30.el7_3.6.x86_64 [109 KiB] Changelog by Lukáš Nykrýn (2016-11-07):
- better version of vmware trigger
systemd-python-219-30.el7_3.3.x86_64 [108 KiB] Changelog by Lukas Nykryn (2016-10-07):
- mtd_probe: add include for stdint (#1381573)
systemd-python-219-30.el7.x86_64 [108 KiB] Changelog by Lukas Nykryn (2016-09-13):
- systemctl,pid1: do not warn about missing install info with "preset" (#1373950)
- systemctl/core: ignore masked units in preset-all (#1375097)
- shared/install: handle dangling aliases as an explicit case, report nicely (#1375097)
- shared/install: ignore unit symlinks when doing preset-all (#1375097)
- 40-redhat.rules: don't hoplug memory on s390x (#1370161)
systemd-python-219-19.el7_2.13.x86_64 [99 KiB] Changelog by Lukas Nykryn (2016-07-27):
- core: use an AF_UNIX/SOCK_DGRAM socket for cgroup agent notification (#1305608)
- logind: process session/inhibitor fds at higher priority (#1305608)
- sd-event: expose the event loop iteration counter via sd_event_get_iteration() (#1342173)
- manager: Only invoke a single sigchld per unit within a cleanup cycle (#1342173)
- manager: Fixing a debug printf formatting mistake (#1342173)
- manager: don't skip sigchld handler for main and control pid for services (#3738) (#1342173)
systemd-python-219-19.el7_2.12.x86_64 [99 KiB] Changelog by Lukas Nykryn (2016-06-14):
- manager: reduce complexity of unit_gc_sweep (#3507) (#1344556)
systemd-python-219-19.el7_2.11.x86_64 [99 KiB] Changelog by Lukas Nykryn (2016-05-26):
- fstab-generator: cescape device name in root-fsck service (#1306126)
systemd-python-219-19.el7_2.9.x86_64 [98 KiB] Changelog by Lukas Nykryn (2016-04-28):
- journal: fix error handling when compressing journal objects (#1292447)
- journal: irrelevant coding style fixes (#1292447)
systemd-python-219-19.el7_2.7.x86_64 [98 KiB] Changelog by Lukas Nykryn (2016-03-04):
- Revert "udev: fibre channel: fix NPIV support" (#1266934)
- udev: path-id: fibre channel NPIV - use fc_vport's port_name (#1266934)
- rules: set SYSTEMD_READY=0 on DM_UDEV_DISABLE_OTHER_RULES_FLAG=1 only with ADD event (#1312011)
systemd-python-219-19.el7_2.4.x86_64 [98 KiB] Changelog by Lukas Nykryn (2016-01-13):
- Avoid /tmp being mounted as tmpfs without the user's will (#1298109)
systemd-python-219-19.el7.x86_64 [97 KiB] Changelog by Lukas Nykryn (2015-10-12):
- udev: make naming for virtio devices opt-in (#1269216)
- tmpfiles.d: don't clean SAP sockets either (#1186044)
systemd-python-208-20.el7_1.6.x86_64 [90 KiB] Changelog by Lukas Nykryn (2015-07-16):
- machined: force machined to dispatch messages (#1243401)
systemd-python-208-20.el7_1.5.x86_64 [90 KiB] Changelog by Lukas Nykryn (2015-05-21):
- rules: load sg module (#1223340)
systemd-python-208-20.el7_1.3.x86_64 [90 KiB] Changelog by Lukáš Nykrýn (2015-04-08):
- Revert "conditionalize hardening away on s390(x)"
systemd-python-208-20.el7_1.2.x86_64 [90 KiB] Changelog by Lukas Nykryn (2015-03-19):
- Revert "units: fix BindsTo= logic when applied relative to services with Type=oneshot" (#1203803)

Listing created by repoview